Maison

>

Dépannage & Entretien

>

Pas d'affichage/Impossible de mettre sous tension

Pas d'affichage/Impossible de mettre sous tension

(Vérifiez d'abord si l'adaptateur ou d'autres câbles d'alimentation sont défectueux ou ont un mauvais contact.)

un、Pas de rétroéclairage, pas d'affichage:1.L'interrupteur d'alimentation du PC est-il allumé?

Raison:Le client ne connaît pas l'interrupteur d'alimentation du PC.

Solution:Appuyez sur le bouton d'alimentation du PC pour allumer l'ordinateur.

2.L'alimentation est normale, Le voyant du bouton d'alimentation du PC ne s'allume pas, motherboard red light.

Raison:
Motherboard defect.

Solution:Replace the motherboard.

3.Store data.

Raison:Motherboard storage capacity is full

Solution:Battery discharge (remove the battery for about 5 secondes, then reinsert it)

4.RAM Installation (Ordinateur)

Raison:Memory module loose connection, loosened due to transportation vibration

Solution:Heavy-duty truck memory module

5.RAM slot (ordinateur)

Raison:Slot contact issue


Soluton:If there are dual card slots, you can switch to another slot.

6.High-voltage busbar

Raison:High-voltage busbar

Solution:Remplacement

7.Backlight cable

Raison:Poor backlighting

Solution:Remplacement

8.Écran LCD

Raison:LCD Screen Fault

Solution:Remplacement

二、Backlight present, pas d'affichage:The external monitor is displaying.

Raison:The BIOS resolution is incorrect.
Poor contact in the LCD screen cable

Solution:Flash the BIOS
Unplug the display cable. If that doesn’t work, remplacer le câble de l'écran. Replace the display cable.

三、Black screen after entering the system:Brightness Settings Issue

Raison:Set brightness to minimum

Solution:Increase the brightness on the external monitor.

四、Setup Issues:Whether BIOS and motherboard jumper settings are configured for power-on boot

Raison:Setting both power-on methods simultaneously will prevent the device from booting up.

Solution:Disable a power-on startup configuration method

五、After running for a period of time, a black screen restart can restore it:Système

Raison:System error

Solution:Reinstall the operating system

六、Touch display:Is the keypad switch turned off?

Solution:Press the POWER button on the keypad.

Partager:

Articles Liés