Thuis

>

Problemen oplossen & Onderhoud

>

Geen weergave/kan niet worden ingeschakeld

Geen weergave/kan niet worden ingeschakeld

(Controleer eerst of de adapter of andere stroomkabels defect zijn of slecht contact maken.)

een、Geen achtergrondverlichting, geen weergave:1.Is de aan/uit-schakelaar van de pc ingeschakeld??

Reden:De klant is zich niet bewust van de aan/uit-schakelaar van de pc.

Oplossing:Druk op de aan/uit-knop van de pc om de computer in te schakelen.

2.De stroomvoorziening is normaal, Het lampje van de aan/uit-knop van de pc gaat niet branden, motherboard red light.

Reden:
Motherboard defect.

Oplossing:Replace the motherboard.

3.Store data.

Reden:Motherboard storage capacity is full

Oplossing:Battery discharge (remove the battery for about 5 seconden, then reinsert it)

4.RAM Installation (Computer)

Reden:Memory module loose connection, loosened due to transportation vibration

Oplossing:Heavy-duty truck memory module

5.RAM slot (computer)

Reden:Slot contact issue


Soluton:If there are dual card slots, you can switch to another slot.

6.High-voltage busbar

Reden:High-voltage busbar

Oplossing:Replacement

7.Backlight cable

Reden:Poor backlighting

Oplossing:Replacement

8.LCD screen

Reden:LCD Screen Fault

Oplossing:Replacement

二、Backlight present, geen weergave:The external monitor is displaying.

Reden:The BIOS resolution is incorrect.
Poor contact in the LCD screen cable

Oplossing:Flash the BIOS
Unplug the display cable. If that doesn’t work, vervang de beeldschermkabel. Replace the display cable.

三、Black screen after entering the system:Brightness Settings Issue

Reden:Set brightness to minimum

Oplossing:Increase the brightness on the external monitor.

四、Setup Issues:Whether BIOS and motherboard jumper settings are configured for power-on boot

Reden:Setting both power-on methods simultaneously will prevent the device from booting up.

Oplossing:Disable a power-on startup configuration method

五、After running for a period of time, a black screen restart can restore it:Systeem

Reden:System error

Oplossing:Installeer het besturingssysteem opnieuw

六、Touch display:Is the keypad switch turned off?

Oplossing:Press the POWER button on the keypad.

Deel:

Gerelateerde artikelen