Dom

>

Rozwiązywanie problemów & Konserwacja

>

Brak obrazu/nie można włączyć

Brak obrazu/nie można włączyć

(Najpierw sprawdź, czy zasilacz lub inne kable zasilające nie są uszkodzone lub czy nie mają słabego styku.)

jeden、Brak podświetlenia, brak wyświetlacza:1.Czy wyłącznik zasilania komputera jest włączony?

Powód:Klient nie jest świadomy obecności wyłącznika zasilania komputera.

Rozwiązanie:Naciśnij przycisk zasilania komputera, aby włączyć komputer.

2.Zasilanie jest normalne, Lampka przycisku zasilania komputera nie świeci się, motherboard red light.

Powód:
Motherboard defect.

Rozwiązanie:Replace the motherboard.

3.Store data.

Powód:Motherboard storage capacity is full

Rozwiązanie:Battery discharge (remove the battery for about 5 towary drugiej jakości, then reinsert it)

4.RAM Installation (Komputer)

Powód:Memory module loose connection, loosened due to transportation vibration

Rozwiązanie:Heavy-duty truck memory module

5.RAM slot (komputer)

Powód:Slot contact issue


Soluton:If there are dual card slots, you can switch to another slot.

6.High-voltage busbar

Powód:High-voltage busbar

Rozwiązanie:Wymiana

7.Backlight cable

Powód:Poor backlighting

Rozwiązanie:Wymiana

8.Ekran LCD

Powód:LCD Screen Fault

Rozwiązanie:Wymiana

Backlight present, brak wyświetlacza:The external monitor is displaying.

Powód:The BIOS resolution is incorrect.
Poor contact in the LCD screen cable

Rozwiązanie:Flash the BIOS
Unplug the display cable. If that doesn’t work, replace the display cable. Replace the display cable.

Black screen after entering the system:Brightness Settings Issue

Powód:Set brightness to minimum

Rozwiązanie:Increase the brightness on the external monitor.

Setup IssuesWhether BIOS and motherboard jumper settings are configured for power-on boot

Powód:Setting both power-on methods simultaneously will prevent the device from booting up.

Rozwiązanie:Disable a power-on startup configuration method

After running for a period of time, a black screen restart can restore it:System

Powód:System error

Rozwiązanie:Reinstall the operating system

Touch displayIs the keypad switch turned off?

Rozwiązanie:Press the POWER button on the keypad.

Udział:

Powiązane artykuły