Hem

>

Felsökning & Underhåll

>

Ingen skärm/Kan inte slå på

Ingen skärm/Kan inte slå på

(Kontrollera först om adaptern eller andra strömkablar är trasiga eller har dålig kontakt.)

en、Ingen bakgrundsbelysning, ingen display:1.Är datorns strömbrytare påslagen?

Resonera:Kunden känner inte till datorns strömbrytare.

Lösning:Tryck på PC-strömknappen för att slå på datorn.

2.Strömförsörjningen är normal, Lampan för PC-strömknappen tänds inte, motherboard red light.

Resonera:
Motherboard defect.

Lösning:Replace the motherboard.

3.Store data.

Resonera:Motherboard storage capacity is full

Lösning:Battery discharge (remove the battery for about 5 sekunder, then reinsert it)

4.RAM Installation (Dator)

Resonera:Memory module loose connection, loosened due to transportation vibration

Lösning:Heavy-duty truck memory module

5.RAM slot (dator)

Resonera:Slot contact issue


Soluton:If there are dual card slots, you can switch to another slot.

6.High-voltage busbar

Resonera:High-voltage busbar

Lösning:Replacement

7.Backlight cable

Resonera:Poor backlighting

Lösning:Replacement

8.LCD-skärm

Resonera:LCD Screen Fault

Lösning:Replacement

två、Backlight present, ingen display:The external monitor is displaying.

Resonera:The BIOS resolution is incorrect.
Poor contact in the LCD screen cable

Lösning:Flash the BIOS
Unplug the display cable. If that doesn’t work, byt ut bildskärmskabeln. Replace the display cable.

三、Black screen after entering the system:Brightness Settings Issue

Resonera:Set brightness to minimum

Lösning:Increase the brightness on the external monitor.

四、Setup Issues:Whether BIOS and motherboard jumper settings are configured for power-on boot

Resonera:Setting both power-on methods simultaneously will prevent the device from booting up.

Lösning:Disable a power-on startup configuration method

五、After running for a period of time, a black screen restart can restore it:System

Resonera:System error

Lösning:Reinstall the operating system

六、Touch display:Is the keypad switch turned off?

Lösning:Press the POWER button on the keypad.

Dela:

Relaterade artiklar